Hi
On our Exchange 2010 SP2 Server we found that over the weekend about 15gb logfiles had been created.
I checked the message tracking. There is some traffic, but not that much. The smtp receive and send logs have a "normal" size. I also checked the mailboxes, but there is no abnormal growth, so no pst Import was done.
This is very suspect. I would like to know what happened, but I don't know where to search.
Any suggestions?
Regards
Peter
Hi,
I migrated from Exchange 2003 to Exchange 2010. Now, I created few new users in Exchnage 2010, but the problem is that the users can't login. What should I do?
Hi
Company B: Own forest, Exchange 2010 organization using Unified Messaging and Lync Server. Lync Server is principally used for phone calls and conferencing.
This company must transfer the mailboxes to the mother company B in a different forest.
Is it possible, to still run Lync and Exchange unified messaging in the forest of Company B, while the mailboxes are in the Exchange organization of Company A?
What are the requirements?
Regards
Peter
AoA Dear Friends i am having a problem regarding my windows server 2008 r2 domain controller.I installed a microsoft exchange 2010 and after some days it crashed but it leaved a lot of changes ,accounts ,groups etc in my domain controller.i want to revert those changes and how it will be done ???
Is Exchange 2010 still un-supported when running in a 2008 R2 virtual machine with a dynamically expanding virtual disk on a 2012 server? I have set this up and it does not seem to be giving any problems. Should I be looking out for anything?
Hi,
I'm using Exchange 2010 SP1 std edition, I would like to export users' mailbox as a .PST file from datastore.
Regards
Patel
Mahendra PATEL
Hi all,
i have Exchange 2007 to 2010 cross forest migration and i have to different public DNS domain names and i will keep it like that will use to DNS public names now my question is if i will have some period for coexistence how can the users in both forests communicate do i have to configure the SMTP name space sharing and add every domain name to the other forest ?
Thanks
Tarek Khairy
I have Exchange Server 2010 running as follows: EX1, EX2, and EX3 are physical servers and have the MB, HT, and CAS roles; EX4 is a virtual server with the HT and CAS roles. EX1, EX2, and EX3 are in a DAG. These span 2 sites. We are successfully
using NetBackup to back up the Exchange databases.
EX1 uses iSCSI to connect to NetApp luns for the drives with the Exchange databases and logs; EX2 and EX3 use local storage with the same drive letters used by EX1.
I want to start using GRT with NetBackup for single item recovery, which would require me to install "Services for Network File System (NFS)" role on the Exchange servers. I have seen references that indicate that NFS is not supported for Exchange 2010. Does that refer only to using NFS to access luns (which I am not doing), or does it mean also that I cannot have the "Services for Network File System (NFS)" role on the Exchange servers (and thus cannot use NetBackup GRT)?
Any information clearing this up will be very much appreciated.
Thank you.
Running Exchange 2010, single server install, SP2 and currently at UR2 level.
WU just tried to install UR4 and failed (with no definitive error code), while looking through the server I determine that its currently at UR2 level (in the updates list, it shows UR1 and UR2 for exchange).
I have no idea why WU tried to install UR4, but it did and so the first thing I tried was installing UR3 which failed at the same point, telling me nothing was installed but nothing more.
I looked online and found others have had issues with UAC and UR for exchange, so I tried installing UR3 via elevated command prompt - same issue.
One of the topics I found online mentioned that when the UR install was started from a non admin command prompt, and failed, the install did actually partially install and an uninstallation was needed before retrying the install via an elevated command prompt.
Since the last UR listed was UR2 I decided to try to uninstall this and then go through the UR's in order all via command prompt, this also failed BUT what was interesting here is that the dialogue shows the following (bear in mind this is when trying to remove UR2):
So when using the uninstaller for UR2, its actually trying to uninstall UR1!
Not sure what to do from here!
We are using Exchange 2010 in a hosted environment with Address Book Policies. The management policy groups all managers together in a shared GAL while also providing them access to other address lists of the child companies. There are several distribution lists within the management GAL that contain members from the child companies, the managers however are unable to see who these recipients are. Is there anyway to grant permissions so that visibility of Distribution Group members is available to these managers without removing them from there address book policy?
Thanks,
I did a bunch of research, but no answers.
This is a new Exchange 2010 Server. Previous mail server was Kerio on Mac OS. Clients have had Outlook 2010 on both Kerio and Exchange. I created new Outlook 2010 profiles for Exchange accounts, and brought over autocomplete file from old profile. Each and every Outlook 2010 client now has properly operating autocomplete in their Exchange profile.
To confirm that the autocomplete had been stored in the users mailbox, I setup a users profile on another computer and confirmed by sending a new email that the entire users' autocomplete was there. That would mean that the users' autocomplete had been stored in their mailbox.
However, when using OWA, logged in as that user (or any user), there is NO autocomplete.
What could the problem be?
Also, if autocomplete is stored in the users' mailbox, why is there an autocomplete stream file in the roaming cache folder? Which is actually used by the Outlook client? Both?
Hi,
I have 3 Servers with Multiple Roles on them, now I have introduced 3 more server to work as a separate Mailbox roles on them and have moved all the mailboxes from old servers to the new servers.
now I have to remove the mailbox roles from the old servers to dedicate them for HUB and CAS Roles and configure the NLB on them.
what could be the impact on those old servers or to the complete organization ? any harm in it ?
or do I have to reinstall the complete servers to the new again ?
Regards
Hello,
I have read where each Rollup is a cumulative update for the Rollups before it.
However even after installing RU5-v2 successfully across my entire production implementation of exchange 2010 SP2 the Rollup RU4-v2 is still appearing when i check online for server updates from microsoft
any ideas?
Many folks have used ISA Server, TMG, and now UAG as reverse proxy to expose OWA, Outlook Anywhere and so on.
I am looking for known working alternatives that provide the same functionality.
I am not looking to debate whether to use a non MS solution or MS solution, but alternatives that are known to work.
Perhaps a Virtual Appliance.
Thanks for your input.
Hi everyone,
I'm using TMG 2010 as my internet proxy, i want guys using tablets(Ipads,Samsung) to use it to access corporate mails.
The challenge is, i can successfully setup active sync on the tablets using open internet but when they connect to the wireless @ my workplace and set the proxy they cant get mails until they connect back to the open internet.
What protocol do i need to allow on my proxy for them to get mails using the proxy internet?
Meshack
Per the Exchange Minimum System Requirements at http://technet.microsoft.com/en-us/library/aa996719(EXCHG.140).aspx
Global Catalog: In each Active Directory site where you plan to install Exchange 2010, you must have at least one global catalog server
Domain Controller: In each Active Directory site where you plan to install Exchange 2010, you must have at least one writeable domain controller
I was hoping to find a definitive answer to the following:
You need only one GC and writable DC per site. However, what if your exchange server is in "company.com" and your GC/DC is in a child domain "child.company.com"? The minimum requirement is per site, but it does not specify that it must be per domain as the exchange 2010 server.
The behavior I have been noticing is that for certain commands in the shell like "get-mailbox" I must use Set-AdserverSettings and set the -ViewEntireForest $True in order to see all Mailboxes.
My main concern is that now we are configuring BES and it seems to be having issues finding necessary AD objects as well.
Is there a way to force exchange to view the entire forest in all applications like powershell and make that permanent? Could this behavior he causing issues with other applications as well such as BES?
Thanks in advance for your input.
So my current setup has mail pointed to one of my hub transport servers and i just implemented an edge server.
now if i initiate edge sync will mail still come to my hub until i point it to the edge server ?
i will change the internal dns once edge sync is complete but will it interupt incoming/outgoing email ?
Exchange 2010 SP2
Content indexing on one database causes memory and CPU to max out on all DAG members. I have isolated the problem to a particular database.
Since the problem followed the mailboxes to the new db, I believe the problem must be with one or more of the mailboxes. There are no event log entries that appear relevant. Just messages about quota limits on archives and mailboxes, etc. Nothing that would indicate a problem indexing anything.
How do I find the problem mailbox?
Is there a concept of "ActiveItems in Mailbox Folder" in Exchange 2010?
Get-MailboxFolderStatistics can get some info about the folders, but I could not find how to get ActiveItems in MailboxFolder. Actually, I'm not sure whether it is a valid concept in Exchange 2010.
Anyone know anything about this?
My boss wants to get a report for the Active Items in all Mailbox Folders, he got this ActiveItems from a report someone showed to him, and did not know what it means. Now, I have to figure it out, ....
thanks